Surface engineered nanohybrids in plasmonic photothermal therapy for cancer: Regulatory and translational challenges

Plasmonic materials as non-invasive and selective treatment strategies are gaining increasing attention in the healthcare sector due to their remarkable optical and electronic properties, where the interface between matter and light becomes enhanced and highly localized. Some attractive applications of plasmonic materials in healthcare include drug delivery to target specific tissues or cells, hence reducing the side effects of the drug and improving their efficacy; enhancing the contrast and resolution in bioimaging; and selectively heating and destroying the cancerous cells while parting the healthy cells. Despite such advancements in photothermal therapy for cancer treatment, some limitations are still challenging. These include poor photothermal conversion efficiency, heat resistance, less accumulation in the tumor microenvironment, poor biosafety of photothermal agents, damage to the surrounding healthy tissues, post-treatment inflammatory responses, etc. Even though the clinical application of photothermal therapy is primarily restricted due to poor tissue penetration of excitation light, enzyme therapy is hindered due to less therapeutic efficacy. Several multimodal strategies, including chemotherapy, radiotherapy, photodynamic therapy, and immunotherapy were developed to circumvent these side effects associated with plasmonic photothermal agents for effective mild-temperature photothermal therapy. It can be prophesied that the nanohybrid platform could pave the way for developing cutting-edge multifunctional precise nanomedicine via an ecologically sustainable approach towards cancer therapy. In the present review, we have highlighted the significant challenges of photothermal therapy from the laboratory to the clinical setting and their struggle to get approval from the Food and Drug Administration (FDA).


Introduction
Plasmonic photothermal effects (PPE) are emerging as a fascinating, rapidly expanding field of research, providing immense potential in various medicinal applications.The core of this growing area lies in the interaction between light and metallic nanoparticles that turn to plasmonic phenomena.The process is characterized by an external near-infrared (NIR) laser that collectively oscillates free electrons within nanoparticles, producing localized surface plasmon resonances (LSPR), considerably enhancing photon energy conversion efficiency [1].Plasmonic nanoparticles may absorb and convert light energy into localized heating when illuminated at their resonance frequencies.This feature makes them useful for various applications, such as photothermal therapy for cancer treatment, drug delivery, and photodetectors.
The selection of plasmonic metals is critical in harnessing these phenomena.Being a noble metal, Gold is highly inert to biological conditions.Its low Ivyspring International Publisher cytotoxicity and high photostability make it suitable for PTT applications [2].Semiconducting metal-based nanoparticles (NPs), like magnetic Fe 3 O 4 NPs [3], molybdenum [4], palladium [5], carbon-based nanomaterials [6,7], or materials loaded with plasmonic photothermal molecules (PPM) such as porphyrin or cyanine derivatives are excellent PPM [8].These NPs (mainly Ag/Au) are frequently combined with chalcogenide semiconductors or orthovanadates to form nanohybrids.Nanohybrid refers to a composite material combining at least two distinct nanoparticles.Combining various nanostructures overcomes the limitations of individual nanoparticles, leading to enhanced properties and achieving multiple functionalities within a single nanoparticle.They have emerged as a promising and innovative diagnostic, imaging and cancer treatment tool.It is critical to understand the structure and composition of these plasmonic materials to tailor their properties for specific applications.
Despite the tremendous potential of PPE, several issues must be addressed.These constraints include concerns about the stability and biocompatibility of plasmonic materials and the necessity for precise heating control in biomedical applications.Overcoming these obstacles while increasing our understanding of plasmonic processes provides new opportunities in nano-therapy.Additionally, regulatory considerations are becoming gradually crucial as plasmonic photothermal technologies evolve.It is critical to ensure the safety of plasmonic materials and devices before they can be successfully implemented in clinical and commercial settings.Regulatory bodies and guidelines (FDA) are evolving to accommodate these innovative technologies and provide a framework for responsible development and application [9].
In exploring plasmonic photothermal effects, we delve into the nanomaterials, challenges, and regulatory landscape, paving the way for a deeper understanding of this field and its transformative potential for treatment.

Surface-engineered plasmonic nanohybrids for photothermal therapy of cancers
Over the past decades, multimodal therapy has drawn enormous attention to developing precise nanomedicine for cancer.So far, various organic and inorganic nanomaterials have been reported as photothermal agents.However, most nanomaterials suffer from poor biocompatibility and low water solubility.Even though these cannot be retained at the tumor microenvironment for a longer duration, resulting in multi-shots.As a cutting-edge research approach, such photothermal nanomaterials are widely used to develop the functionalized nanohybrid for multimodal therapy towards the precise nanomedicine design.Combining various functionalities in a solitary nanostructure strengthens their unified properties and diverse applications.However, it is a big challenge to develop such a multifunctional nanohybrid platform with desired features like reduced side effects, toxicity, and target-specific release of chemotherapeutic agents sustained to achieve/optimize the antimetastatic therapeutic effectiveness.In this section, we have highlighted promising surface-engineered plasmonic nanohybrids that researchers have developed in the past couple of years to achieve multimodal, synergistic therapy for cancer.We also explained specific upconversion nanoparticles (UCNPs) guided photothermal therapy considering their long-lasting photostability, attractive optical features like narrow emission peaks, and anti-Stokes luminescence under NIR irradiation.

Metallic plasmonic nanohybrids
Some metals containing plasmonic properties are gold (Au), silver (Ag), zinc (Zn), Copper (Cu), Aluminium (Al), platinum (Pt), palladium (Pd), magnesium (Mg), and ruthenium (Rh) [10].Among these metals, gold nanorods are found most promising due to their longitudinal tuneable local surface plasmon resonance (LSPR), biocompatibility, admirable photothermal stability, and high photothermal conversion efficiency (PCE) [11].A synergistic strategy was developed by using dual plasmonic nanomaterials gold nanorods and polyethylene glycol (PEG) functionalized two-dimensional molybdenum disulfide (AuNRs/MoS2) nanosheet electrostatically bonded with indocyanine green (ICG) to achieve combined photodynamic and photothermal therapy (PDT/PTT) under low power density (0.2 W/cm 2 ) single laser activation.This material was effective in reducing the photobleaching effect of ICG.A unique core-shell nanohybrid platform containing gold nanorods loaded with ICG in the core and coated with mesoporous silica serves as the shell, which is further wrapped with reduced graphene oxide (rGO) attached with polyethylene glycol and doxorubicin (DOX) was developed for maximum anticancer efficiency [12].This study explored the tuneable LSPR of anisotropic gold nanorods (maximum at 758 nm), which was further sifted after mesoporous silica coating (at 768 nm) and loading of ICG (at 780 nm).However, the wrapping with rGO attributed to the 99% quenching of the emission peak of ICG due to the self-accumulation of the dye and the surface energy transfer of nanomaterials.This non-radiating decay, in turn, leads to the photothermal conversion and enhances the photothermal activity of the nanohybrid.This nanohybrid's maximum temperature reached was 61.7º C under 15-minute irradiation of NIR light (808 nm, CW, 2 W/cm 2 ).Hence, integrating the multimodal techniques in a single nanohybrid established the ability to detect and treat tumors, drug carrier ability, and significant nano enzymatic activity and photothermal efficacy, showing remarkable tumor specificity.For the first time, a greener nanotechnology strategy hypothesized the design and fabrication of an innovative integrated plasmonic-excitonic nanohybrid consisting of gold nanoparticle (AuNPs) coupled with a layer of semiconductor zinc sulfide quantum emitter (ZnS-QE) surrounded by a macromolecular shell of carboxy methyl cellulose (CMC) [13].In this AuNP-ZnS@CMC nanocomposite, the multifunctional biopolymer CMC simultaneously acting as a biocompatible shell and capping ligand and represented nanotheranostic behavior synchronously by integrating the excitonic activity of ZnS-QE and plasmonic activity of AuNPs.The ZnS-QE layer facilitates the bioimaging, and AuNPs effectively kill one of the most lethal types of brain cancer, i.e., glioblastoma multiforme.
After gold nanoparticles, the silver nanoparticle possesses tuneable surface plasmon strength within a wide biologically transparent window of 650 -1200 nm, effective light trapping, and intense light scattering potential [14].Folate receptor-targeted quercetin-loaded silver nanoparticles were prepared for photothermal therapy of breast cancer.This innovative pentagonal QRC-FA-AgNPs revealed a robust and tuneable plasmonic field >800 nm region.Upon 5-minute exposure to 1.5 W/cm 2 NIR light of 808 nm, the hyperthermia effect was potentiated after the quercetin quenching, facilitating targeted endocytosis and enhancing breast cancer cells' thermal sensitivity.An in-vitro study on non-small lung cancer cells (NCI-H460) with chitosan-coated silver nano-triangle (Chit-AgNTs) showed a high potential PTT agent in cancer.This nanohybrid, in comparison with thiolated poly (ethylene) glycol-capped gold nanorods (PEG-AuNRs), showed a higher rate of cell destruction upon continuous treatment with Ti: sapphire laser (800 nm) when irradiated at similar laser power density.
Platinum (Pt) is another promising candidate based on its high atomic number and ability to enhance radiotherapy's sensitivity.The maximum absorption of platinum was reported mainly in the ultraviolet region, which lessens their photothermal effect.Despite the potential initiator of merged PTT and chemotherapeutic effect, platinum shows significant cytotoxicity.However, recent studies reported that platinum-based nanocomposites offer good cytocompatibility without significant toxicity.It was hypothesized that a larger number of Pt core aggregations showcases the effective PTT for glioblastoma [15].The ultra-small single-core platinum nano seeds were compared with the multi-core raspberry-like platinum nanoparticles for their PTT on glioblastoma spheroids.Upon irradiation of 808 nm laser with 1.65 W output power, the nano-raspberry exhibited high photothermal conversion in contrast to nano seeds, confirming the fact that multi-core structure mediated by alendronate accumulation within the endosome made them suitable for both intra and extracellular heating leading to death of the cancer spheroids.Packing CeO2 into Au@Pt core-shell and further functionalizing with PEG showed the desired targeted photothermal effects along with dual catalytic and peroxidase-like enzymatic activities, which relieve the hypoxia [16].
As a low-cost metal with suitable mechanical catalytic properties and outstanding stability, and considering their green synthesis, palladium nanoparticles are now widely used as PTT agents in cancer therapy.Palladium nanoparticles (PdNPs) functionalized with arginine-glycine-aspartic acid (RGD) enhance its homing at the tumor region by targeting alphaV beta3 (αvβ3) integrin [17].The surface of this nanohybrid was again coated with a low molecular weight water-soluble chitosan oligosaccharide (COS) to improve the biocompatibility of this nanoconstruct (Pd@COS-RGD).This fabricated nanohybrid showed good physiological stability with sustained blood circulation and internalization into the tumor, leading to an efficient 93.4% photothermal conversion at 808 nm laser power and, within 4 minutes, killed 70% of cancer cells.Chaga mushroomderived anisotropic porous Pd nanoconstruct also exhibited a tri-modal anticancer effect [18].To achieve chemotherapy, DOX was loaded into this porous nanocomposite.Under 4-minute 808 nm NIR laser irradiation in an acidic tumor environment, this nanohybrid sustained release of DOX via electrostatic interaction, resulting in hyperthermic ablation of HeLa cells.
As a transition metal copper nanomaterials mostly, copper sulfide (CuS) has been widely explored in the PTT of cancer owing to NIR absorbing capacity and stimulated reactive oxygen species (ROS) generation ability upon light irradiation.However, considering their toxicity, the release of copper ions is undesirable in our bodies.To overcome this toxicity issue, the copper nanomaterials were functionalized with several polymers such as poly(isobutylene-alt-maleic anhydride), PEG, thiolated PEG, thiolated PEG-COOH followed by reduced graphene oxide modifications [19].These conjugated copper nanohybrids demonstrated enhanced colloidal stability without aggregation for almost a month.However, it was well reported that the NPs of 100-150 nm attributed to enhanced permeability retention effect (EPR), resulting passive accumulation in tumors but unable in trafficking deep solid tumors.Meanwhile, the NPs, like quantum dots with 10 nm or even smaller particle size, easily infiltrate the tumor site, and they are susceptible to hepatic and renal clearance due to their tiny size.To address this drawback, surface-engineered UCNP-guided PTT was developed as an emergent strategy.Zhang et al. designed UCNP@CuS-HA nanocomposite to double-target the explosible nano firework for image-guided deep solid tumor PTT [20].In this study, ~30 nm monodispersed oleic acid-capped UCNPs (NaYF4: 2% Er 3+ ) were prepared and enveloped with ultrasmall (~4 nm) CuS NPs tethered hyaluronic acid (HA) corona.To facilitate the EPR, the hydrodynamic diameter of the UCNP@CuS-HA nanocomposite was set to 100-150 nm.Improved PTT was observed as the CuS NPs scattered away and infiltrated quickly into the tumor depth and, at the same time, recovered the initial CuS NP-quenched UCNP's luminescence.Wang et al. designed another UCNPs-guided nanohybrid GdOF: Yb 3+ /Er 3+ @(GNDs@BSA)-DOX-FA for targeted image-guided chemo-photothermal tumor ablation [21].UCNPs dominated outstanding NIR-triggered PCE and luminescence properties reported.Simultaneously, GND@BSA was attributed to excellent X-ray attenuation and photothermal ablation.The FA conjugation and BSA coating further reduced the nanohybrids' in-vivo toxicity and facilitated their biological circulation.Another review was reported on UCNPs mediated PTT/PDT of cancer with nanocomposites NaGdF4: Yb and Er@Tf-RB.These UCNPs synthesized by thermal decomposition and in-vitro anticancer potential were evaluated on 4T1 breast cancer cells [22].

Non-metallic plasmonic nanohybrids
Formerly, the metals were identified as efficient for plasmonic photothermal applications against cancers.However, many of these metals fail to achieve the desired photothermal conversion efficiency due to poor tuneability, radiative loss, and high energy dissipation.As cutting-edge research to overcome such conditions, two-dimensional (2D) materials are progressing with quantum internment effects [23].Some advanced 2D materials are graphene, graphene oxides, metal oxides, non-metals, MXenes, hexagonal boron nitride, and pnictogens.LSPR is not limited to the metallic nanostructures.Semiconductors can show the LSPR effect once they generate adequate carrier concentrations.The non-metallic LSPR nanomaterials have demonstrated additional advantages over the metallic, like scalability, low cost, and high performance [24].The free carrier density of semiconductors is 10 17 -10 22 /cm 3, resulting in a broad range of LSPR frequency ranges from THz to near-infrared.Considering the example of graphene, which contains a low level of 2D carrier concentration of around 10 12 / cm 2, resulting in the plasmonic frequency in the middle infrared spectra.Non-metallic plasmonic nanomaterials can be broadly classified as extrinsic doping nanomaterials (doped with heterovalent) and self-doped nanomaterials (deficient anion and cation vacancies) [25].Non-metallic plasmonic nanomaterials overcome their instability, high electron-hole complexation rate, and low carrier concentration using doping, co-crystals, and heterojunctions.These materials can control the free carrier concentration by controlling the composition and concentration of the host material.The titanium carbide (Ti3C2) nanosheet was reported to be used as a substrate to anchor functional components like nanodrugs and nanozymes.The Ti-based MXene nanocomposites (Ti 3 C 2 T X -Pt-PEG) decorated with artificial Pt nanozymes exhibited peroxidase (POD) like activity, which induced apoptosis and necrosis of cancer cells upon irradiation of NIR-II light (at power density of 0.75 W/cm 2 ) [26].The temperature elevation from the Ti 3 C 2 T X simultaneously enhanced the POD activity; hence the satisfactory synergistic nanozyme/PTT therapy was established.

Extrinsic doping metal oxide
Metal oxides have demonstrated wide-gap semiconductors, and their energy falls in the visible to near-UV spectrum.To support LSPR, the doping of these materials can be controlled through aliovalent substitutional impurities, interstitial atoms, and the introduction of vacancies, resulting in the generation of sufficient free carrier concentration [27].Many metal oxides doped hetero-valent atoms like Ne-doped TiO2, In-doped CdO, Al-doped ZnO, Sn-doped In 2 O 3 (ITO).Sn-dopped ITO showed excellent electrical conductivity and optical characteristics, opening new scopes in facilitating their application in the MIR and NIR regions.The amount of SN attribute in the changes of LSPR frequencies also enhances the trapping ability [28].Doping metal oxide of AZO reduces the loss of synthesized film through atomic layer deposition and converges a crossover wavelength to near IR with improved optical properties.Subsequent activation is possible with the doped AL in the ZnO matrix.This LSPR mode is exceptionally flexible, varying the doping concentration, ZnO buffer thickness, deposition temperature, heat treatment, etc [29].The introduction of Er 3+ in the CuS showed the changes in the band gap and defects of the photocatalysts.The photocatalytic performance of this composite was enhanced by introducing the surface defect and Cu vacancies [30].All these examples suggest the influence of doping concentration on the LSPR effect and a tuneable LSPR frequency.

Self-doped metal oxides
Self-doped metal oxides enable LSPR with high-density free carriers.Several materials include ZnO, MoO 3-x , WO 3-x , TiO 2-x , MoS 2-x, and copper-deficient chalcogenides [25].Due to the high density of holes in the valance band aroused by the Cu deficiencies, Cu 2-x S showed excellent plasmonic adsorption in the NIR region.By changing the vacancies in the valency band, the wavelength of the LSPR can be changed [31].Combining more semiconductors (e.g., Zns-CdS-Cu 2-x S) can form a heterogeneous junction that can widen the light absorption ranges and improve carrier separation efficiency.These heterojunction materials showed wide ranges of spectrum absorption, like UV absorption due to ZnS, visible absorption due to CdS, and NIR absorption due to Cu 2-x S [32].It was observed that the optical properties and LSPR effect significantly improved this material compared to bare ZnS and binary ZnS-CdS.Synthesized controlled size and shape of Cu 2-x Te nanoparticles using diphenyl phosphine showed anisotropic growth with cubic structure and better NIR adsorption [33].The ZnS shell of the Cu 2-x Se@ZnS nanoparticles prevents the oxidation of the Cu 2-x Se core in a strongly reducing environment.Even slow oxidation still occurred due to the diffusion of Cu + through ZnS, resulting in the LSPR effect in the NIR region due to the Cu vacancies [34].
Oxygen vacancy defects are another crucial parameter to enrich the photocatalytic activities and light capturing of metal oxides, resulting in the light region extension to NIR.A few examples of this category are ZnO, MoO3-x, TiO 2-x , and WO 3-x .These materials show strong oxidation properties, are non-toxic, and have low manufacturing costs.WO 3 can be synthesized by different methods to improve the photolytic activity.The photocatalytic efficiency was enhanced significantly by introducing O 2 vacancies in this molecule.Additionally, absorption in the visible light and conductivity can be improved by the LSPR effect of AO 3-x in the NIR region.Oxygen vacancy was introduced at low-temperature annealing in alcohol to WO 3 to get WO 3-x, resulting in a high concentration of oxygen vacancies.That leads to the recombination of photogenerated electron-hole pairs, improvement of separation efficiency of free carriers, and photocatalytic performance [35].W 18 O 49 showed an effective broad-range absorption of NIR and visible light antenna to modulate a full spectrum solar-light-driven photocatalysis [36].This LSPR is generated from the localized electron confinement around the lattice W 5+ -W 5+ pairs of the structure of W 18 O 49 .Achieving optimum photocatalytic activity and prerequisite characteristics like adsorbing light across the whole solar spectrum and generating active charge by a single semiconductor with oxygen vacancies is difficult.The instability problem of plasmonic photocatalyst WO3-x in an aqueous solution was achieved by introducing photoinduced electron injection to construct CdS/WO 3-x heterostructure [37].These non-elemental metal plasmonic nanowires are more stable and active than the WO 3-x and semiconductor CdS.MoO 3 is another non-toxic and low-cost semiconductor that shows optimum adsorption capacity.The light absorption range was broadened when oxygen vacancies were introduced to the MoO 3 to develop MoO 3-x .This material also forms complexes with other semiconductors to improve the photocatalytic activity.The heterojunction interaction between MoO 3-x and CdS initiates interfacial charge transfer, migration of photoexcited charge carriers, and charge segregation by reducing the electron-hole pairs [38].CdS/MoO 3-x is a novel photocatalyst with MoO3-x and varying proportions of CdS nanospheres.During the synthesis, polyvinylpyrrolidone was a reducing agent that generated oxygen defect in MoO3 and helped develop crosslinking between CdS and MoO3-x.This composite demonstrated higher visible light photocatalytic performance.In addition, hole-oxidized photo corrosion of CdS was suppressed due to the presence of the hole-attractive MoO 3-x .

Plasmonic metamaterials
Metamaterials open a new science scope comprising nanoscience, optics, physics, material science, and engineering.The overexpressed interest in these materials is mainly due to their building blocks' unique internal physical structures [39].These are three-dimensional macroscopic composites and periodic cellular architecture designed to show specific excitation.Including slight inhomogeneities can produce a distinct, effective macroscopic behavior [40].Earlier researchers focused either on plasmonic or metamaterials rather than the outstanding features and responses originating from the interplay between these two materials.It is well demonstrated that combining these two materials could open up a wider opportunity and establish a new cross-disciplinary approach in the PTT of cancer.Graphene has gained attraction as a plasmonic metamaterial owing to its unique electronic, mechanical, optical, and thermal properties [39].Combining plasmonic and graphene physics could create a versatile platform for photothermal application in optical and terahertz regimes.
Mesoporous silica-coated gold nanorods (AuNRs), a dual responsive nanohybrid, were developed for triple-combination therapy of breast cancer [41].Doxorubicin and IR 820 photosensitizer were co-loaded into the degradable silica pores.Hyaluronic acid (HA) was encapsulated into the nanocomposite to endow it with improved biocompatibility for targeting mammary carcinoma.After endocytosis, this nanohybrid was degraded rapidly by hyaluronidase (HAase) and glutathione (GSH), releasing IR 820 and DOX into the tumor site.Irradiation of 808 nm laser on this nanohybrid triggers the photothermal response and shows profound photodynamic and chemotherapeutic activity, leading to a highly efficient antitumor effect.

Limitations of plasmonic nanohybrids
A significant obstacle in translating plasmonic nanoparticles (P-NPs) into clinical practice is the inadequate accumulation of P-NPs in the targeted tissue.It was hypothesized that these P-NPs should demonstrate good solid tumors enhanced permeability and retention (EPR) effect.However, agglomeration and stability pose potential obstacles to their performance and further applications.P-NPs often exhibit a high EPR effect due to their small size and large surface-to-volume ratio, leading to agglomeration due to NPs sticking.This agglomeration reduced the stability of P-NPs and hindered their long-term storage [42].Several other factors influence the agglomeration of P-NPs, including their size, shape, surface chemistry, and concentration.Smaller P-NPs exhibit a higher surface area-to-volume ratio, making them more susceptible to agglomeration than larger P-NPs.Additionally, P-NPs with sharp edges or corners are more prone to agglomeration than those with smooth surfaces.The surface chemistry of P-NPs also plays a crucial role.Hydrophilic P-NPs tend to agglomerate less than hydrophobic P-NPs.Finally, the concentration of P-NPs in a solution directly impacts agglomeration.Higher concentrations of P-NPs have a greater likelihood of agglomerating compared to lower concentrations.These factors collectively influence the agglomeration behavior of P-NPs and must be carefully considered when designing and utilizing P-NPs for biomedical applications [43].Agglomeration can have several adverse effects on the performance of P-NPs.For example, agglomeration can reduce the surface area of P-NPs, which can reduce their catalytic activity towards targeted tissue and other surface-dependent properties.
Additionally, agglomeration can reduce the light scattering efficiency of P-NPs, which can hinder their use in optical applications [44].To prevent the agglomeration of P-NPs, a common approach is to coat the P-NPs with a stabilizing agent.Stabilizing agents can prevent the P-NPs from sticking together by electrostatically creating a steric barrier or repelling each other.Another approach to preventing agglomeration is to functionalize the surface of the P-NPs with hydrophilic groups, which can make the P-NPs more water-soluble and less likely to agglomerate [45].Limited light absorption is a foremost challenge for P-NPs in plasmonic photothermal therapy (PPTT).The effectiveness of PPTT depends on the ability of P-NPs to absorb light, and P-NPs with limited light absorption in specific wavelength ranges will be less effective for this therapy.
Several factors contribute to the light absorption of P-NPs, including size, shape, composition, and surface chemistry.Smaller graphene oxide-gold nanorods (GO-AuNR) have broader absorption bands than larger GO-AuNR.Additionally, GO-AuNR with different shapes and compositions can have different absorption bands.Finally, the surface chemistry of P-NPs can also affect their light absorption.
To improve the light absorption of GO-AuNR for PPTT, researchers are designing particles with specific sizes, shapes, and compositions that match the wavelength of light that will be used for treatment [46].Another approach is to coat P-NPs with a material that can enhance their light absorption.For instance, Antibody-conjugated single-walled carbon nanotubes (SWCNTs) are a promising new class of photothermal therapy (PTT) agents.They effectively kill cancer cells when illuminated with near-infrared (NIR) light.The SWCNTs are coated with a gel that is conjugated with antibodies that are specific to cancer cells.When the SWCNTs are illuminated with NIR light, they absorb it and convert it into heat.This heat kills the cancer cells.The antibody-conjugated gel coating enhances the light absorption of the SWCNTs, making them more effective at killing cancer cells [47].Gold nanorods (AuNRs) with low light absorption in the NIR region are less effective for plasmonic photothermal therapy.Still, they can penetrate deeper into tissues, making them suitable for treating deeper tumors beneath the skin.
The therapeutic window is a critical parameter in PPTT, representing the range of light wavelengths that can be safely employed without causing damage to healthy tissues.This therapeutic window is typically narrow for plasmonic nanohybrids, often restricted to the near-infrared (NIR) spectrum (700-1000 nm).The absorption spectrum of these hybrids is influenced by their composition, size, and shape.Sometimes, the absorption spectrum may be narrow, limiting their effective light absorption to a restricted wavelength range.That poses challenges for clinical applications, as finding a wavelength of light that effectively eliminates cancer cells while safeguarding healthy tissues can be problematic.
Multiple factors contribute to the narrow therapeutic window for metal-semiconductor hybrids in PPTT.One factor is the strong light scattering exhibited by these hybrids.They can disperse light over a broad range of wavelengths, potentially leading to excessive heating and damage to healthy tissues.Another factor involves the nonlinear optical properties of these hybrids.They can absorb light at one wavelength and emit it at a different wavelength.That can result in heat generation at wavelengths not absorbed by the hybrids, further jeopardizing healthy tissues.
Gold-silicon (Au-Si) nanorods exhibit a limited absorption spectrum within the NIR region (700-1100 nm), making finding a wavelength that effectively eliminates cancer cells while safeguarding healthy tissues is challenging.Researchers are exploring strategies to modify the composition and structure of Au-Si nanorods to broaden their absorption spectrum and expand their therapeutic window [48].In addition to potential toxicity, other concerns are associated with using inorganic nanoparticles (such as Au NPs) in PPTT, including their distribution in the body, long-term effects, and clearance.Differences in the size, shape, structure, and surface properties of nanoparticles, combined with specific characteristics of cells and tumors in vivo models, create a complex challenge in fully understanding and addressing toxicity issues.Positive results from early preclinical studies often involve in vivo cellular models and subcutaneous xenograft murine models.Still, these don't precisely mirror the complexities of cancer problems and clinical conditions.The advancement of PPTT is essential to develop more accurate in vivo and in vitro models considering the diverse heat responses and temperature regulation mechanisms of various cell cultures and animals [49].Certain core-shell hybrids may exhibit cytotoxic effects or trigger immune responses, limiting their therapeutic potential.For instance, gold-silica (Au-SiO2) core-shell nanoparticles have been shown to induce apoptosis and cell death in certain cell lines [50], while silver-silica (Ag-SiO 2 ) core-shell nanoparticles can elicit inflammatory responses [51].
Core-shell hybrids' cytotoxic and immunogenic properties can lead to adverse effects, such as liver damage, kidney dysfunction, and systemic inflammation.Therefore, it is essential to carefully assess core-shell hybrids' biocompatibility and toxicity profile before clinical application in PPTT.The effectiveness of PPTT can be limited by the limited penetration depth of light in biological tissues.This limitation is particularly relevant for nanoporous hybrids like mesoporous silica nanoparticles (MSNs) located deep within tissues, as they may not receive sufficient light for effective heat generation.For instance, near-infrared (NIR) light, commonly used in PPTT, can penetrate tissues only 2-3 millimeters.Consequently, MSNs beyond this depth may not generate enough heat to kill cancer cells [52].
Researchers are exploring strategies to enhance light penetration depth to address this challenge, such as using longer wavelengths of light.Near-infrared (NIR) light with 650-950 nm wavelength has been shown to penetrate tissues deeper than visible light.For instance, NIR light with a wavelength of 800 nm can penetrate tissues up to 5 mm, while NIR light with a wavelength of 1064 nm can penetrate tissues up to 10 mm [53].The use of longer wavelengths of NIR light has been shown to improve the efficacy of PPTT in animal models.For example, a study by Zhou et al. showed that PPTT using Molybdenum disulfide (MoS2) nanodots with a NIR absorption peak of 1064 nm was more effective at killing cancer cells in mice than PPTT using hyaluronic acid Molybdenum disulfide HA-MoS 2 nanodot with a NIR absorption peak of 808 nm [54].
Developing nanoporous hybrids with improved light scattering properties could further enhance their ability to absorb and utilize light for effective PPTT.The nanoarray of nanoporous hybrids can trap light by enhancing the scattering effect and prolonging the effective transmission channel.This results in good light absorption, essential for photothermal treatment [55].The light propagation dynamics within biological tissues embedded with nanoparticles are intricately linked to the anisotropic scattering properties of the incorporated nanoparticles.These properties are demonstrably influenced by a quartet of factors: nanoparticle morphology, dimensions, orientation, and incident light wavelength.Crucially, nanoparticles tending to forward scattering behavior facilitate enhanced light penetration depth.This phenomenon translates to a more uniform distribution of both the Specific Absorption Rate (SAR) and temperature within the tissue, a pivotal factor in achieving precise thermal damage localization during therapeutic applications [56].Gold nanoparticle-coated mesoporous silica nanoparticles (MSNs) and a silica shell have enhanced light-scattering properties.Gold nanoparticles can act as nano-antennas due to the gold core for visible and infrared radiation, enhancing the interaction of light with nanoscale matter and concentrating light onto the MSN [57].As a result, gold nanoparticle-coated MSNs can absorb and utilize light more effectively than uncoated MSNs [58].Carbon nanotubes (CNTs) are also known for their light-scattering properties.MSNs coated with CNTs have enhanced light-scattering properties, which can improve their ability to absorb and utilize light for PPTT [59].In addition to these examples, researchers are continuously developing new nano-porous hybrids with improved light-scattering properties.These hybrids have the potential to revolutionize the field of PPTT and provide new and more effective treatments for cancer and other diseases.
Heterogeneity and variability in the size, shape, and composition of plasmonic NPs like metal-semiconductor hybrids can significantly impact their photothermal properties and therapeutic outcomes in PPTT.Achieving consistent and reproducible results can be a challenge due to these variations.For instance, gold-silicon (Au-Si) nanorods with different aspect ratios exhibit distinct light absorption and heat generation capacities, affecting their therapeutic efficacy [60].Similarly, SiO 2 -coated silver (SiO2@AgNPs) nanoparticles with varying shapes and sizes display diverse optical properties, influencing their photothermal performance [61].These inconsistencies in metal-semiconductor hybrids can lead to unpredictable treatment outcomes, hindering their clinical translation in PPTT.Therefore, developing strategies to synthesize metal-semiconductor hybrids with uniform size, shape, and composition is crucial for achieving reproducible photothermal properties and enhancing the efficacy of PPTT.Table 1.Summarizes the limitations of above explained nanohybrids.

Gold
It is difficult to synthesize with high purity and reproducibility, and they can be susceptible to photodegradation.Additionally, some gold nanohybrids can be cytotoxic.
[62] Silver It isn't easy to synthesize with high purity and reproducibility, and they can be less stable than other plasmonic nanohybrids.Silver nanohybrids can be more challenging to target specific cells and tissues. [51]

Graphene
Limited light penetration depth: This can make it challenging to ablate large tumors or tumors located deep inside the body.Additionally, graphene nanohybrids can be more susceptible to aggregation and sedimentation. [63] Silicon A limited absorption spectrum in the NIR region can make them less effective for PTT.Additionally, silicon nanohybrids can be more difficult to synthesize with high purity and reproducibility. [48] Molybdenum A limited absorption spectrum in the NIR region can make them less effective for PTT.Additionally, molybdenum nanohybrids can be more difficult to synthesize with high purity and reproducibility. [54]

Green synthesis of plasmonic nanoparticles way to future directions
The numerous uses of plasmonic nanoparticles (PNPs) in nanotechnology have increased the need to develop new synthesis techniques.Consequently, several protocols have been developed for synthesizing PNPs in different sizes, shapes, and compositions (Figure 1).In addition to microorganisms like bacteria, algae, fungus, and yeast in the known green synthesis methods of today (Table 3), metal ions are bio-reduced to their corresponding nanomaterials using plants or plant components (Table 2) and informational macromolecules like proteins, polypeptides, DNA, and RNA.The potential of biogenic nanoparticles for cancer nanomedicine was demonstrated by their rapid internalization by cancer cells, affecting their cellular organization and karyoplasmic ratio [64,65].The study examined the cytotoxic effects of Indigofera tinctoria leaf extract and nanoparticles on the A549 lung cancer cell line [71].It has been demonstrated that when concentration increases, cell viability decreases and that nanoparticles are more harmful to cancer cells than pure leaf extract.The goal of creating gold and silver nanoparticles was to treat breast cancer cells by imparting antioxidant, catalytic, and antimicrobial properties using an aqueous extract of dried Amomum villosum (cardamom) fruits [72].The process was done at room temperature.Gold nanoparticles from the leaf extract of Sasa borealis were used.These gold nanoparticles were found to have anticancer activity against gastric adenocarcinoma cancer (AGS) cells and have a toxic effect on normal and embryonic kidney cells (HEK293).Within the Poaceae family of grasses is the bamboo species Sasa borealis [73].Its reported anticancer activity.The MTT assay demonstrated that AuNPs cause toxicity based on the dose-dependent growth inhibition of A549 cells [71].Rat basophilic leukemia (RBL) cell monolayer was used using the scratch assay, and the silver nanoparticle's anticancer potential was assessed.The outcomes demonstrated that the synthetic silver nanoparticles hindered RBL cell migration.The produced silver nanoparticles demonstrated antimicrobial potential with minimum inhibitory concentration (MIC) values ranging from 4-16 µg/mL against strains of bacteria that are both Gram-positive and Gram-negative [74].Reactive oxygen species (ROS) can be produced by zinc oxide (ZnO) nanoparticles when they encounter light and have good photocatalytic qualities.When the ZnO NPs are exposed to light, they release ROS, which can provide protection from harm to healthy tissues and specifically destroy cancer cells through oxidative stress [75].A high toxicity effect was observed at concentrations of 4.7 μg/mL-1, as discovered by testing the in vitro cytotoxicity of various concentrations of flaxseed-derived iron oxide nanoparticles (IONPs) against MCF-7 cells.Psoralea corylifolia-mediated IONPs have been shown to have a remarkable cytotoxic effect against renal tumor cells, as well as potential anticancer activity [76].Copper nanoparticles (CuNPs) and an aqueous extract from Allium noeanum leaves [77].Copper nanoparticles have been shown to have anti-human endometrial cancer effects against HEC-1-A, HEC-1-B, Ishikawa, HepG2 cancer cells, and KLE cell lines exhibiting high cell death.Using Abutilon indicum leaf extract, which is non-toxic, simple, and inexpensive, the hierarchical CuO NPs were created using a green chemistry method [78].The greenly synthesized Cr2O3 nanoparticles demonstrated significant antioxidant and anticancer effects on MCF-7 cancerous cells and the linoleic acid system [79].The findings show that the platinum-palladium nanoparticles (Pt-PdNPs) exhibited notable cytotoxic effects against the lung cancer A549 and the breast adenocarcinoma MCF-7 cells, with IC50 values of 8.8 and 3.6 µg/mL.These values are analogized with those of PtNPs 10.9 and 6.7µg/mL, PdNPs IC 50 31 and 10.8µg/mL, and carboplatin IC50 23 and 9.5µg/mL, respectively [70,80].Silver nanoparticles (AgNPs) were green synthesized using the extracellular methodology and Pseudoduganella eburnea MAHUQ-39.This process is easy, inexpensive, and environmentally friendly.Pseudoduganella eburnea MAHUQ-39 is a bacteria identified from a soil sample [90].AgNPs were synthesized effortlessly and environmentally without the necessity for reducing agents using the culture supernatant of Pseudoduganella eburnea MAHUQ-39.Additionally, the antibacterial efficacy of environmentally synthesized silver nanoparticles (AgNPs) was examined against human pathogens that exhibit resistance to multiple drugs.Several microorganisms have been observed recently, including Novosphingobium species, Brevibacterium frigoritolerans, and Bacillus methylotrophicus.For environmentally friendly silver nanoparticle synthesis, THG-C3 has been isolated.After being exposed to varying concentrations of AgNPs.They demonstrated antibacterial activity (MBC 64-256µg/ml -1 and MIC 8-128µg/mL -1 ) and significantly reduced ATP levels in bacterial cells.AgNPs were discovered to be cytotoxic to MCF-7 breast cancer cells and RAW 264.7 macrophages in a dose-dependent manner, with the latter type of cells exhibiting higher cytotoxicity than the former following in-vitro analysis.The green AuNPs showed potent cytotoxicity against MCF-7 cancer cells, acceptable levels of cytotoxicity against normal cells, and enhanced activity against pathogens [94].The outcomes show that using AuNPs produced by Anacardium occidentale (Leaves) for antibacterial purposes is safe.

Preclinical challenges
Although the development of PPT is a unique method for selectively targeting and eliminating cancer cells while sparing healthy tissue, considerable preclinical obstacles persist.These agents must have certain qualities, such as significant NIR absorption, thermal stability, and ideal physicochemical parameters, such as size, shape, biocompatibility, and stability in biological fluids.One major obstacle involves effectively delivering photo-absorbing agents to the tumor site, which requires navigating rigid barriers, including the impermeable blood-brain barrier.Simultaneously, ensuring the precise delivery of NIR light irradiation to the tumor site requires overcoming biological impediments without causing unintended damage.Many in-vitro studies required laser power of more than 6 W/cm 2 [95,96].However, in a study, glioblastoma mice were treated with NPs camouflaged with brain metastatic tumor cell membranes.This study displayed that 1.0 W/cm 2 of laser power was sufficient to effectively decrease tumor development and penetrate the blood-brain barrier [97].Maintaining strict control over power density within safety limits (1.0 W/cm 2 and 0.33 W/cm 2 for 1,064 and 808 nm lasers, respectively) and achieving sufficient light penetration depth for inducing localized hyperthermia (HT) is of paramount importance [98].
Yu He et al. investigated the risks of PTT in brain tissue.Following laser therapy, they examined temperature variations in three distinct porcine brain tissues.They discovered that the optical and thermal characteristics of different tissues differed.Hyperthermia was established with the injection of gold nanoshells (AuNSs) and silver nanoplates (AgNPs); however, the effect was attenuated due to substantial absorption and scattering of brain tissue.The loss of laser intensity was measured as it passed through the cerebral tissues [99].
PTT-PDT combination therapy has shown remarkable potential for cancer therapy [100,101].However, having a spectral incompatibility between a PDT agent and a PPM, sequential irradiation with two separate lasers is needed to activate PDT and PTT.This results in a lengthy and challenging treatment period [102,103].Furthermore, aligning both laser beams in a single place is challenging.To initiate synergistic PDT/PTT or even single-mode PTT, a high-power laser (1 W/cm 2 ) irradiation is required.However, it poses safety issues because it tends to cause skin burns.Due to the limited PTT performance of a single PTT agent, a significant amount of PTT agent is usually placed under long-term laser irradiation to induce localized hyperthermia, which may cause damage to normal tissues.To achieve a simultaneous synergistic PDT/PTT effect under single low-power NIR laser irradiation, an AuNRs/MoS2 hybrid was constructed, which could generate extreme heat under a single power of 0.2 W/cm 2 [104].
Developing nanomaterials with a strong absorption in the NIR-I region is also desirable.One such nanohybrid was developed by Qui et al.Au@MgFe 3 O 4 improved NIR absorption while providing magnetic characteristics for MRI-guided cancer cell PTT.A scab was noticed on the epidermis, implying burns resulting from PTT-generated heat [105].Laser irradiation was performed in time intervals to avoid tissue injury from hyperthermia.In the first interval, the surface temperature of the tumor increased from 34.7 to 53.8 °C, reaching 54.8 °C in the second.It was found to have the ability to kill cancer cells.The epidermis was not burned, and the temperature dropped to body temperature within 1 minute, indicating a safer therapy [12].
Until now, most research focused on generating NIR-I (700-900 nm) triggered nanohybrids.However, the intrinsic advantages of NIR-II (1000-1700 nm), like deep penetration into tissues, precise spatial resolution, and high maximum permissible laser exposure to tissues, surpass those with plasmonic characteristics in visible (400-700 nm) and NIR-I.These NIR-II plasmonic materials, in particular, could be used for in vivo visualization of deep tumors [106], [107].All the above studies have been summarised in Table 4.

FDA regulatory aspects
An image-guided study using anisotropic plasmonic gold nanorod-Indocyanine green@reduced graphene oxide (GO)-doxorubicin nanohybrids demonstrated enhanced tumor theranostic.Indocyanine green (ICG), which has FDA approval, has shown a great deal of promise when combined with various nanoplatforms for near infra-red (NIR) contrast imaging and Photothermal therapy (PTT) or photodynamic therapy (PDT) [12].ICG is an effective NIR-absorbing PTT agent with remarkable light-to-heat conversion efficiency for cancer treatment.A pilot clinical study conducted in 2011 showed the potential intervention of ICG for metastatic breast cancer.Ten patients were enrolled in this study with advanced-stage metastatic breast cancer received.Laser immunotherapy was given by local injection of ICG and glycated chitosan, followed by 805 nm laser irradiation at a power density of 1 W/cm 2 .This therapy achieved an objective response rate of 62.5% and a clinical benefit response rate of 75% [115].Now, the FDA has approved a few nano-based medications, including Caelyx, Dolix, Abraxane, and Transdrug.In addition to serving as a model drug carrier as a nano vehicle for cancer therapies, ultrathin graphene oxide (GO) is a promising option for enhancing the stability and effectiveness of hybrid nanostructures for various applications [116,117].NIR laser-induced photothermal therapy (PTT) converts optical energy into thermal energy through a photothermal agent, and it can potentially be an effective localized, minimally invasive antitumor treatment.The FC-808 fiber-coupled laser system works at a wavelength of 808 nanometres and has a power of 0.5 W/cm 2 .It was used to perform NIR laser-induced photothermal heating [118].By embedding ICG on mesoporous silica-coated gold nanorods (GNRs) and wrapping reduced graphene oxide (rGO) [12], in addition to attaching DOX and polyethylene glycol, A hybrid material that was smaller than 100 nm was produced.The hybrid material also possesses three remarkable properties: nonenzymatic activity, photothermal activity, and drug carrier ability.The biological tumor detection and therapy window was appropriate for its NIR absorption capability, approximately 780 nm.Discoveries from both in-vitro and in-vivo experimentations recommended that administering GNRS-ICG@rGO-DOX hybrid material under 808 nm laser irradiation could effectively suppress the growth of HT-29 tumors [69,119].Combining photothermal therapy techniques and chemotherapy by inducing cell apoptosis with the anticancer drug DOX and catalytic therapy by producing excess reactive oxygen species (ROS) in the tumor location causes apoptosis mediated by mitochondria [120][121][122][123][124][125].
It was recently discovered that doxorubicin could be found as a therapeutic payload in hybrid micellar nanoparticles with multiple functions that include metal NPs for magnetic resonance imaging (MRI), near-infrared fluorescent imaging with quantum dots, prolonged circulation times with polyethylene glycol (PEG), and F3-peptide specific to tumor [90,116,125].FDA-approved Doxil-and Doxo- [125] liposomal formulation as anticancer nanotherapeutic.Auranofin is an FDA-approved triethyl phosphine that contains gold [126].It is used to treat rheumatoid arthritis, cancer, neurodegenerative diseases, HIV/AIDS, parasitic infections, and bacterial infections [124,126].Recently, gold-on-gold homometallic hybrids with controllable overgrowth of either spherical or branched gold domains on the GNR surface were obtained, along with the interface energy and growth kinetics.Under the NIR-II laser, pairwise plasmonic GNR@Cu2-x, these heterostruc-tures might be used for photothermal ablation of cancer cells in-vivo and in-vitro.The growth of tumors is significantly inhibited when the GNR@Cu2-xSe heterostructures and NIR-II laser are combined [106].The physiochemical properties, antiviral, anticancer, scalability, biocompatibility, and cost-effectiveness of metal nanoparticles, especially those formulated through green nanotechnology or green chemistry, have attracted a lot of interest as cancer or viral therapeutics and therapeutic drug delivery systems [124].The intra-tumoral administration of the nanohybrid, and laser irradiation, successfully regressed in-vivo tumor growth. [108] AuNR-ICG@rGO-DOX Nanohybrids Width ~60 nm and length ~90 nm, core-shell structure.Aurolase ® is a 150 nm gold nanoshell based on another PTT system that Nanospectra Biosciences developed.It contains a 120 nm silica core as the dielectric core, a 15 nm gold shell for NIR light-responsive thermal ablation, and a polyethylene glycol layer [124].Another emerging technology, AuroShell ® (also developed by Nanospectra Biosciences), demonstrated better accumulation in tumor tissue through enhanced permeability and retention effect.AuroShell particles comprise a 10-20 nm thick gold shell deposited on a solid silica (silicon dioxide) core.These particles do not accumulate in healthy tissue and are cleated by the reticuloendothelial system from the bloodstream.These particles were coated with a 5000 molecular weight methoxy polyethylene glycol (mPEG) chain through the thiol bond to stabilize in saline solution.After administration, this coating improved stability and enhanced the circulating half-life [127].Another clinical trial study was reported on nanohybrid Auroshell containing silica core and gold nanoshell of ~ 150 nm diameter to treat and ablate prostate cancer [128].This study was conducted on sixteen patients.During the intravenous infusion of the gold silica nanoshell (GSN), one patient experienced transient epigastric pain and, hence, was excluded from the study.The median number of laser excitations required was 25.However, the laser power was also increased from 4.5 W to 6.5 W to expand the laser ablation zone.As a positive outcome, this pilot study complied with the safety end point according to common terminology criteria for adverse events (CTCAE) during 90 days of follow-up.60% cancer-free ablation zones were reported in 9 patients out of 15 at three months of the therapy.In contrast, 87% of cancer-free zones were reported in 13 patients out of 15 at 12 months of the therapy.The outcome of this clinical trial study demonstrated that GSN-directed laser-induced ablation is a technically adequate, safe, and feasible procedure that holds promise for targeted tumor destruction without causing collateral damage to the surrounding healthy tissues and organs.The above explained clinical trial study summarized in Table 5.

Conclusion and prospects
It is essential to check the uniformity and reproducibility before the production scale-up of these plasmonic nanohybrids.According to the recent plasmonic materials market forecast, Asia Pacific is expected to account for the largest share from 2023 to 2031.Day-by-day, the oncological drug approval and reaching the clinical phase increases significantly.Despite much struggle, very small proportion of plasmonic photothermal therapy reached the clinical phase.That is mainly due to the lack of safety, formulation prospects, and effective delivery.All these challenges need the development of new clinical protocols and translation methods.Another promising drawback is the long-term toxicity of PPTT.The surface-engineered and conjugated nanohybrid developed through synthetic or green technology needs to have good bio-and hemo-compatibility.At the preliminary stage, animal experimentations are done on the lower rodents, which is quite distinct from human trials [129].The long-term toxicity study should not be restricted to six months as this period is insufficient to predict the potential toxicity of PPTT.Delivery of metal or non-metal plasmonic nanomaterials to the target tumor site is crucial for effective therapy, reduced side effects, and less adverse effects on the healthy tissues.
Active and passive mechanisms achieve drug targeting.During passive targeting, the particle size (50-200 nm) is crucial in accessing and penetrating cells.Active targeting can also be made possible by embedding ligand conjugation with the plasmonic nanomaterials.Synthesizing plasmonic nanohybrid through green synthesis opens a new scope with improved cytotoxicity.More focus must be emphasized on the environmentally friendly green synthesis method for plasmonic nanohybrids.The scaling of nanohybrids to industrial scale should be considered during the design of new synthetic methods.Considering the tremendous advancement of plasmonic and metamaterials assembled, nanohybrid will inevitably offer promising opportunities to address the grand challenges in the PTT of cancers.However, the penetration of NIR light through human tissues is limited to a few depths, and delivery of non-ionizing radiation to well-defined target tissue volumes is challenging.These results in incomplete access to tumor cells and ablative modalities [130].Recently, specific UCNPs-based multimodal imaging probes have emerged as sophisticated technology in biomedical theranostic applications aimed to fulfil effective cancer therapy by enabling deep tumor penetration, activating the caspase-induced cancer cell apoptosis, NIR-triggered enhanced ROS generation, and profound photothermal conversion.
Additionally, the combination of photothermal therapy with chemotherapy can be an effective treatment option for controlling cancer.In combination, chemotherapy may elicit the efficacy of PTT by inhibiting the regrowth of damaged tumor blood vessels.Integrating nanoparticles with photosensitizing agents and drugs opens a new direction for future research that can be validated through clinical testing.

Table 2 .
Green synthesis plasmonic nanohybrids extracted from plants

Table 4 .
Comparison between various nanohybrids for photothermal therapy of cancer.

Table 5 .
Clinical trial study